RTS IP-223 Dual IP Remote Adapter Panel
One moment please while we configure RTSIntercoms.com for you...

Welcome to RTS. Please specify your country so we can customize your experience.

The Americas
Asia & the Pacific Rim
the Middle East, & Africa
Latin America
RTS Telex


Dual IP Remote Adapter Panel

Encode iDEN Emergency

Able to receive and decode ID and information related to incoming iDEN emergency signals.

Sepura Status Messaging

Able to decode, and display status messages generated via TETRA (Sepura SRM200/3500) radios.

Radio Telephony Operation

Allowing local console to change a remote radio channel via POTS line.

Enhanced Crosspatch capabilities

Line-to-line crosspatch
Enable and disable via DTMF strings.
Start/Stop Function Tone Line-to-Line Crosspatch
Designated function tones have the ability to automatically set up and knock down line-to-line crosspatches within the device.
Remote user with portable radio can key a DTMF string, causing IP-223 to take the TDI off-hook, dial a preprogrammed phone number, and establish a patch between the devices via DTMF strings.
Dial VoIP
Remote user with portable radio can key DTMF string, causing IP-223 to join different multicast group and port–mapping the IP to a different channel.
Phone Patch
Remote user with portable radio can key a DTMF string, causing IP-223 to take the TDI off-hook. The user can then manually dial a phone number.
Multiple Vocoders
Per Line Vocoder Type - ability to select lower bandwidth Vocoder.

Kenwood P25 TK5710/5810 serial control

Supports encode and decode of FleetSync ID and P25 ID, channel change, scan ON/OFF, and monitor. Also capable of direct serial control of Kenwood 80, 90, and 150 Series radios.

Generate FleetSync MSK signal at the IP-223

DMR Radio: NexEdge Does not require specific Kenwood base station.

Advanced compatibility with multiple radio manufacturers

Motorola, Kenwood, EF Johnson, iDEN, Sepura.

5-Tone Detection

Decodes 5-tone messages received from remote radios and sends console information to display.

COR Click Dialing

While using COR, the remote user can key click a portable radio, causing the IP-223 to take a TDI off-hook, and dial a preprogrammed phone number to establish a telephone connection between remote user and a designated dispatch console.

Improved Web-Based Programming Interface

Redesigned Web page displays important information on start screen and simplifies navigation to critical programming areas.
Audio Distortion 2% THD maximum
Audio Frequency Response ±1.5dB, 300 to 3000Hz
Color Black
Depth 9.75" (247.7 mm)
DTMF Detection Bandwidth ±25Hz around center of frequency
Ethernet Speed 10 BaseT or 100 BaseTX
Form Factor Desktop
Height 1.63" (41.3 mm)
Input/Output Levels Input: 10mVpp to 10Vpp, adjustable, Output: 10mVpp to 10Vpp for mic level or -40 to +10dBm into 600W load, adjustable
Lease Line 2W and 4W supported
Monitor Timer 10ms to 9999ms, adjustable
Non-Relay Outputs Open-collector, active low, 200mA, 40V max.
Operating Temperature 0° to 70 °C (32° to 158° F)
Output Impedance 600W for balanced mode, 200W for single-ended mode
Power Requirements +12 to +16VDC, semi-regulated, ~700mA
Radio Interface ±45VDC withstand rating
Relay Contact Ratings 1A at 125VAC
Weight 3.75 lbs (1.7 kg)
Width 8.5" (215.9 mm)


Related News

Related products

RTS is part of the Bosch Communications Systems family of brands, offering the world's most complete portfolio of professional audio and communications solutions.

Share this with:
E-mail Email